EN/DIN Mirija ya Chuma Iliyofumwa kwa Usahihi wa Juu
Tube ya Chuma Iliyofumwa ya EN/DIN ya Juu ya Usahihi wa Juu inatengenezwa kulingana na DIN 2391-C na EN10305-4.Inatumika sana katika mifumo ya majimaji, zana za mashine, magari, meli, mashine za ujenzi na magari.Bomba la chuma lisilo na mshono la Hydraulic na usahihi wa juu lina faida nyingi: Hakuna kutu baada ya saa 120 JARIBIO LA NYUNYUZI YA CHUMVI;Utendaji mzuri katika Anti Corrosion & Rust;Bomba mkali la umeme lililowekwa na Zinki;Rangi tofauti: Nyeupe/ Njano/Rangi;Shinikizo la Juu/Hakuna bomba la chuma lisilo na mshono linalovuja.
Vipimo
| Kawaida | DIN2391 DIN1630 EN10305 DIN2445 JIS G3445 SAE J524 |
| Daraja | ST35/E235 ST37.4 ST45/E255 ST52/E355 |
| Hali ya Uwasilishaji | NBK(+N) BK(+C) GBK(+A) BKW(+LC) BKS(+SR) |
| Ukubwa | OD:4 hadi 219mm Unene 0.5-35mm, Urefu: 3m, 5.8,6 au kulingana na mahitaji |
| Maliza | Uso wa mabati (Sliver/Njano/Rangi) Mipako ya zinki ya 8-12um |
| Maombi | Mfumo wa Hydraulic;Gari/basi;gari la ujenzi |
| Wakati wa utoaji | Siku A.3 ikiwa bidhaa hii ni ya hisa.B. Takriban siku 30 kulingana na wingi |
| MIRIJA YA CHUMA YA HYDRAULIC PRECSION KATIKA HIFADHI | ||||||||||
| OD | Unene(mm) | |||||||||
| mm | ||||||||||
| 4 | 4*1 | |||||||||
| 6 | 6*1 | 6*1.5 | 6*2 | |||||||
| 8 | 8*1 | 8*1.5 | 8*2 | |||||||
| 10 | 10*1 | 10*1.5 | 10*2 | 10*2.5 | ||||||
| 12 | 12*1 | 12*1.5 | 12*2 | 12*2.5 | 12*3 | |||||
| 14 | 14*1 | 14*1.5 | 14*2 | 14*2.5 | 14*3 | |||||
| 15 | 15*1 | 15*1.5 | 15*2 | 15*2.5 | 15*3 | 15*3.5 | ||||
| 16 | 16*1 | 16*1.5 | 16*2 | 16*2.5 | 16*3 | 16*3.5 | 16*4 | 16*4.5 | ||
| 18 | 18*1 | 18*1.5 | 18*2 | 18*2.5 | 18*3 | 18*3.5 | 18*4 | 18*4.5 | ||
| 20 | 20*1 | 20*1.5 | 20*2 | 20*2.5 | 20*3 | 20*3.5 | 20*4 | 20*4.5 | 20*5 | |
| 22 | 22*1 | 22*1.5 | 22*2 | 22*2.5 | 22*3 | 22*3.5 | 22*4 | 22*4.5 | 22*5 | |
| 25 | 25*1 | 25*1.5 | 25*2 | 25*2.5 | 25*3 | 25*3.5 | 25*4 | 25*4.5 | 25*5 | |
| 28 | 28*1 | 28*1.5 | 28*2 | 28*2.5 | 28*3 | 28*3.5 | 28*4 | 28*4.5 | 28*5 | |
| 30 | 30*1 | 30*1.5 | 30*2 | 30*2.5 | 30*3 | 30*3.5 | 30*4 | 30*4.5 | 30*5 | 30*6 |
| 32 | 32*1.5 | 32*2 | 32*2.5 | 32*3 | 32*3.5 | 32*4 | 32*4.5 | 32*5 | 32*6 | |
| 34 | 34*1.5 | 34*2 | 34*2.5 | 34*3 | 34*3.5 | 34*4 | 34*4.5 | 34*5 | 34*6 | |
| 35 | 35*1.5 | 35*2 | 35*2.5 | 35*3 | 35*3.5 | 35*4 | 35*4.5 | 35*5 | 35*6 | |
| 38 | 38*2 | 38*2.5 | 38*3 | 38*3.5 | 38*4 | 38*4.5 | 38*5 | 38*6 | ||
| 40 | 40*2 | 40*2.5 | 40*3 | 40*3.5 | 40*4 | 40*4.5 | 40*5 | 40*6 | ||
| 42 | 42*2 | 42*2.5 | 42*3 | 42*3.5 | 42*4 | 42*4.5 | 42*5 | 42*6 | ||
| 45 | 45*2 | 45*2.5 | 45*3 | 45*3.5 | 45*4 | 45*4.5 | 45*5 | 45*6 | ||
| 46 | 46*2 | 46*2.5 | 46*3 | 46*3.5 | 46*4 | 46*4.5 | 46*5 | 46*6 | ||
| 48 | 48*2 | 48*2.5 | 48*3 | 48*3.5 | 48*4 | 48*4.5 | 48*5 | 48*6 | ||
| 50 | 50*2 | 50*2.5 | 50*3 | 50*3.5 | 50*4 | 50*4.5 | 50*5 | 50*6 | ||
| 54 | 54*2.5 | 54*3 | 54*3.5 | 54*4 | 54*4.5 | 54*5 | 54*6 | |||
| 60 | 60*2.5 | 60*3 | 60*3.5 | 60*4 | 60*4.5 | 60*5 | 60*6 | |||
| 65 | 65*3 | 65*3.5 | 65*4 | 65*4.5 | 65*5 | 65*6 | ||||
| 75 | 75*3.5 | 75*4 | 75*4.5 | 75*5 | 75*6 | |||||
| 76 | 76*4 | 76*4.5 | 76*5 | 76*6 | ||||||
| 89 | 89*6 | |||||||||
| Kumbuka: Tunaweza kutoa saizi zingine kama mahitaji yako.Matibabu ya uso: Bright, Galvanized, Phosphating nk. | ||||||||||
Muundo wa kemikali
| Daraja la chuma | C | Si | Mn | P | S | Al | |
| Jina | Hapana. | max | max | max | max | max | max |
| E215 | 1.0212 | 0.1 | 0.05 | 0.7 | 0.025 | 0.015 | 0.025 |
| E235 | 1.0308 | 0.17 | 0.35 | 1.2 | 0.025 | 0.015 | - |
| E355 | 1.058 | 0.22 | 0.55 | 1.6 | 0.025 | 0.015 | - |
| ST35 | 1.0308 | 0.17 | 0.35 | 0.4 (dakika) | 0.025 | 0.025 | - |
| ST45 | 1.0408 | 0.21 | 0.35 | 0.4 (dakika) | 0.025 | 0.025 | - |
| ST52 | 1.058 | 0.22 | 0.55 | 1.6 | 0.025 | 0.025 | - |
Mali ya mitambo
| Daraja la chuma | Nguvu ya Mazao (Mpa) | Nguvu ya Mkazo (Mpa) | Kurefusha (%) | |
| Jina | Hapana. | ReH (dakika) | Rm(dakika) | A(dakika) |
| E215 | 1.0212 | 215 | 290 hadi 430 | 30 |
| E235 | 1.0308 | 235 | 340 hadi 480 | 25 |
| E355 | 1.058 | 355 | 490 hadi 630 | 22 |
| ST35 | 1.0308 | 235 | 340 hadi 480 | 25 |
| ST45 | 1.0408 | 255 | 440 hadi 570 | 21 |
| ST52 | 1.058 | 355 | 490 hadi 630 | 22 |
Uvumilivu
| OD | Uvumilivu unaoruhusiwa | Uvumilivu Maalum | ||
| GB/T3639 | DIN2391 | OD | WT | |
| 4 mm-20 mm | ± 0.10mm | ±0.08mm | ± 0.05mm | ± 0.05mm |
| 20-30 mm | ± 0.10mm | ±0.08mm | ±0.08mm | ±0.08mm |
| 31 mm-40 mm | ± 0.15mm | ± 0.15mm | ± 0.10mm | ±0.08mm |
| 41-60 mm | ± 0.20mm | ± 0.20mm | ± 0.15mm | ± 0.15mm |
| 61mm-80mm | ± 0.30mm | ± 0.30mm | ± 0.20mm | ± 0.20mm |
| 81mm-120mm | ± 0.45mm | ± 0.45mm | ± 0.30mm | ± 0.30mm |
Hali ya utoaji
| Uteuzi | Alama | Maelezo |
| Baridi imekamilika (ngumu) | BK(+C) | Mirija haifanyi matibabu ya joto kufuatia uundaji wa baridi ya mwisho na, kwa hivyo, ina upinzani wa juu kwa deformation |
| Baridi imekamilika (Laini) | BKW | Matibabu ya mwisho ya joto hufuatiwa na kuchora baridi inayohusisha deformation ndogo.Usindikaji zaidi unaofaa huruhusu kiwango fulani cha uundaji baridi (kwa mfano, kupinda, kupanua) |
| (+LC) | ||
| Baridi imekamilika na kupunguza mkazo | BKS(+SR) | Matibabu ya joto hutumiwa kufuatia mchakato wa mwisho wa kuunda baridi.Kwa kuzingatia hali zinazofaa za usindikaji, ongezeko la mikazo ya mabaki inayohusika huwezesha kuunda na kutengeneza kwa kiwango fulani. |
| Annealed | GBK(+A) | Mchakato wa mwisho wa kuunda Baridi hufuatwa na kuingizwa kwenye angahewa iliyodhibitiwa. |
| Imesawazishwa | NBK(+N) | Mchakato wa mwisho wa uundaji wa baridi hufuatwa na kuingizwa juu ya sehemu ya juu ya mabadiliko katika anga inayodhibitiwa. |
Ubora
1.Madhubuti kulingana na DIN2391/EN10305 au viwango vingine.
2. Sampuli: Sampuli ni bure kwa majaribio.
3. Vipimo: Mtihani wa dawa ya chumvi/Mtihani wa Kupunguza nguvu / Mtihani wa sasa wa Eddy / Mtihani wa muundo wa kemikali kulingana na ombi la wateja
4.Cheti: IATF16949, ISO9001, SGS nk.
5.EN 10204 3.1 Uthibitisho
Maombi
